Alumina 96% Injection molding
Product
Alumina 96%
Material
Al2O3 (96%)
Typical Composition
MgO%
BaO%
CaO%
SiO%
Na2O%
0.7-1.1
0.0-0.4
1.1-1.5
1.5-2.1
< 0.15
Typical Properties of Sintered Parts
Sintering is typically done at temperatures > 1550°C in air.
Theoretical Density
3.84 g/cm3
Density
> 98%
Bend Strength
300-400 MPa (as-fired)
Fracture Toughness
4.2 MPa. √m
Hardness
1800 HV
Applications
Parts with good wear or corrosion resistance. Electrically insulating bodies, vacuum industry. Maximum temperature of use 1200°C.
Ceramic Tubes | Ceramic Rods | Ceramic Plates | Armor Plates | Ceramic Fish Spine Beads | Ceramic Substrates
Ceramic Seal | Ceramic Bearing and Rollers | Thermocouple Protection Tube | Metalized Ceramic
Ceramic Screws | Ceramic washers | Alumina Insulators | Ceramic Ball | Link
